Ezy Kleen Neo

Let your walls come alive with our colours.

EZY KLEEN NEO

Stain Repellent Emulsion

Apollo Paints Ezy Kleen Neo Emulsion is luxury interior emulsion is formulated with special type of cross-linking polymers& fine pigments which imparts luxury finish.

Performance Features: Stain repellent paint with very high washability & scrub resistance giving it a longer life with easy maintenance.

USP:
• Supreme Stain Repellence,
• Super Washability,
• Silky Smooth & Longer life.

Usage Area: All Interior Plastered Surfaces.

DIRECTIONS FOR USE:

Surface Preparation:

 New Surfaces – Freshly plastered surfaces should be allowed to cure completely. Ensure the plaster is completely dry and thoroughly clean, free from any dust, flakes and dampness, etc.

 Previously painted surface – Remove all loose particles, powdery material or defective paint by thorough wire brushing, scraping and water jetting (if required). If chalking or powdery surface persists, one coat of Apollo Paints Magic Sealer with a dilution in the ratio of one litre magic sealer mixed with one litre of potable water is advisable / recommended.Ensure that all water leakages/seepages are repaired before painting.

Remove stains like mud, pencil marks, tea, coffee etc., with a mild detergent / soap solution. For harsh stains like pickles, oil, colour pencils, crayons, etc. use strong diluted cleaning solution to remove these stains, once the stains are completely removed, use a piece of clean wet cloth to wipe of remaining light stains. Stain removal results may vary according to the nature for the stain.

Filling:

 CRACKS: For filling cracks up to 3mm use Apollo’s InstaCare Crack Lock.

 For Holes & Dents: In case of dents and holes use Apollo’s Wall Grace White Cement based putty or combination of white cement and fine sand in the ratio 1:3.

Recommended Undercoats:

Please Note: Application of undercoat is must for new plastered surfaces, while it is optional in the case of old/repainting surfaces.

Priming:

Option 1: Apply one coat of Apollo’s “InstaCare Prime N Seal” silicon enriched, Efflorescence Resistant, and Water Proof High Performance Primer Sealer as primer coat with a thinning ratio of one part of Prime N Seal with one part of potable water.

Option 2: Apply one coat of Apollo’s Aroprime (Emulsion Based) Water Thinnable Interior Primer with a thinning ratio of one litre of primer with 700 to 750ml of potable water.

Putty for smooth finish:

New Wall Surface: Apply a minimum of 2 to 3 coats of either Apollo Paints Wall Grace white cement based putty or Apollo Paints Polo Acrylic Silky wall putty till you get a smooth undulation free surface.

Old / Re-painting surface: Normally, old wall surfaces don’t need full putty, need only spot putty work where ever dents / holes are there. Use Apollo’s either wall grace or acrylic putty.

Finish Paint:

Finish Coat: Apply a minimum of 2 to 3 coats of Apollo Paints Ezy Kleen Neo emulsion with a thinning ratio of one litre of paint with a maximum of 400 to 450ml of potable water. Allow a minimum of 3-4 hours drying time between coats.

Maintenance Tips: For best durable performance ensure a clean wet cloth to wipe off dust at regular intervals. Allow drying time of 3 weeks for proper film formation before any sponge cleaning with mild soap solution.

COVERAGE **

On Primed SurfaceMinimum Recommended Number of CoatsCoverage
By Brush / Roller ApplicationTwo CoatsSingle Coat 210 – 220 sq ft/ltr
Two Coats 110 – 120 sq ft/ltr

 **Coverage depends on many factors like surface conditions, surface preparation, application skill, weather conditions, dilution etc. The coverage mentioned is under ideal conditions and will vary depending on site conditions.

TECHNICAL DATA:

1ThinningPotable Water
2Thinning Ratio for Light / Pastel shadesMaximum of 450ml of water per 1ltr of Paint.
3Thinning Ratio for Vibrant / Dark shadesMaximum of 200-250ml of water per liter of Paint.
4Method of applicationBrush or Roller
5Drying Time SD : 2 hrs
6Pot life of thinned materialUse within 24hrs
7Sheen Level 35 - 40 @ 600 GH
8Flash Point100% water – base paint, hence NA
9Recommended Surface All Interior Plastered Surfaces
10VOC (gm/ltr)Conforms to strict International Environmental & Safety Standards.
12Fire Hazard ClassNon - flammable
13Safety DataRefer MSDS

Shelf life: 3 years from date of manufacture in original tightly closed containers. Keep the container away from direct sunlight and excessive heat.

Safety Measures:

Keep out of reach of children and away from eatables.

Please refer to the product related MSDS which is available on request.

May be harmful if swallowed. In case of ingestion seek immediate medical attention.

Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

In case of skin contact, immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.

Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.

Do not pour leftover paint down the drain or in water courses.

No added Lead, Mercury or Chromium compounds.

Precautions:

Do not apply when ambient temperature is less than 100C or if the temperature might drop to this level within 4 hrs of application.

Do not apply when humidity is greater than 90%. It may cause prolonged drying time of paint and moisture condensation on the walls.

In high humidity areas, use of a Bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould, etc. before application of the paint system.

Stir well & strain before use. Tinted paints need thorough shaking immediately after tinter added as well as before use.

For best performance, ensure that the surface is dry. The moisture level on the wall should be less than 16%. If the moisture level is more than the recommended level. Find out the source of water and address it before painting.

Use diluted materials within 48 hours

Keep the left-over paint container tightly closed to prevent drying.

SPECIAL NOTE *

Before painting the following things should be checked thoroughly:

1. pH value of the wall surface (Ideal condition between 7-10).

2. Moisture content of the wall (Ideal condition –below 10-12%).

If these are violated, owner will be responsible.

*As per test conducted at Apollo R&D.

DISCLAIMER: The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carry out tests & take trials to ensure on suitability of products meeting their requirements prior to full scale usage of our products. Since the correct identification of problems, quality of other materials used and on- site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained. The company does not assume any liability or consequential damage for unsatisfactory results arising from the use of our products.

Menu