Eco Plus Ultra Sheen
Let your walls come alive with our colours.
ECO PLUS ULTRA SHEEN
Enviro Luxury Emulsion
Apollo Paints Eco Plus Ultra Sheen Enviro Luxury Emulsion is an environment friendly luxury emulsion which is low on VOC for Safe and virtually odourless application.
Performance Features: Eco Plus Ultra Sheen is an interior luxury emulsion with extra ordinary sheen which provides lavish look on walls.
USP: Low VOC, Supreme Stain Repellent, Super Washability, Silky Smooth & lead free. Eco plus Ultra Sheen is Virtually Odour less, Maintains excellent air quality.
Usage Area: All interior smooth wall surfaces, Plaster of Paris surfaces, false ceilings, asbestos sheets, etc.
Most Ideal: All interiors like Living rooms, Dining rooms, Bed rooms, Common spaces.
DIRECTIONS FOR USE:
Surface Preparation:
New Surfaces – Freshly plastered surfaces should be allowed to cure completely. Ensure the plaster is completely dry and thoroughly clean, free from any dust, flakes and dampness, etc.
Previously Painted Surface – Remove all loose particles, powdery material or defective paint by thorough wire brushing, scraping. If chalking or powdery surface persists, one coat of Apollo Paints Magic Sealer with a dilution in the ratio of one liter magic sealer mixed with one liter of potable water is advisable / recommended. Ensure that all water leakages/seepages are repaired before painting.
Remove stains like mud, pencil marks, tea, coffee etc., with a mild detergent / soap solution. For harsh stains like pickles, oil, color pencils, crayons, etc. use strong diluted cleaning solution to remove these stains, once the stains are completely removed, use a piece of clean wet cloth to wipe of remaining light stains. Stain removal results may vary according to the nature for the stain.
Filling:
CRACKS: For filling cracks up to 3mm use Apollo’s InstaCare Crack Lock.
For Holes & Dents: In case of dents and holes use Apollo’s Wall Grace White Cement based putty or combination of white cement and fine sand in the ratio 1:3.
Recommended Undercoats:
Please Note: Application of undercoat is must for new plastered surfaces, while it is optional in the case of old/repainting surfaces.
Priming:
Option 1: Prime the surface with a coat of Eco Plus base coat & dry overnight. Dilute in the ratio of one litre of base coat with 600 to 650 ml of potable water.
Option 2: Apply one coat of Apollo’s “Insta Care Prime N Seal” silicon enriched, Efflorescence Resistant, and Water Proof High Performance Primer Sealer as primer coat with a thinning ratio of one part of Prime N Seal with one part of potable water.
Option 3: Apply one coat of Apollo’s Aroprime (Emulsion Based) Water Thinnable Interior Primer with a thinning ratio of one liter of primer with 600 to 650ml of potable water.
Putty for Smooth Finish:
New Wall Surface – Apply a minimum of 2 to 3 coats of either Apollo Paints Wall Grace white cement based putty or Apollo Paints Polo Acrylic Silky wall putty till you get a smooth undulation free surface.
Old / Re-Painting Surface – Normally, old wall surfaces don’t need full putty, need only spot putty work where ever dents / holes are there. Use Apollo’s either wall grace or acrylic putty.
Finish Paint:
Finish Coat: Apply a minimum of 2 to 3 coats of Apollo Paints Eco plus Ultra Sheen Enviro Luxury Interior Emulsion with a thinning ratio of one liter of paint with a maximum of 400ml of potable water. Allow a minimum of 3-4 hours drying time between coats.
Maintenance Tips: For best durable performance ensure a clean wet cloth to wipe off dust at regular intervals. Allow drying time of 3 weeks for proper film formation before any sponge cleaning with mild soap solution.
COVERAGE **
| On Primed Surface | Minimum Recommended Number of Coats | Coverage |
|---|---|---|
| By Brush / Roller Application | Two Coats | Single Coat 300 – 340 sq ft/ltr Two Coats 150 – 170 sq ft/ltr |
**Coverage depends on many factors like surface conditions, surface preparation, application skill, weather conditions, dilution etc. The coverage mentioned is under ideal conditions and will vary depending on site conditions.
TECHNICAL DATA:
| 1 | Thinning | Potable Water |
| 2 | Thinning Ratio for Light / Pastel shades | Maximum of 300ml to 350ml of water per one liter of Paint. Note: For Dark shades a maximum of dilution / thinning should be 5-10% depending on shade. Coverage may be less as compared to light shades. |
| 3 | Thinning Ratio for Vibrant / Dark shades | Maximum of 100-150ml of water per liter of Paint. |
| 4 | Method of application | Brush or Roller |
| 5 | Drying Time | SD : 2 hrs |
| 6 | Pot life of thinned material | Use within 24hrs |
| 7 | Gloss Level | 40 - 50 @ 600 GH |
| 8 | Flash Point | 100% water – base paint, hence NA |
| 9 | Recommended Surface | Sand / Cement Plastered Surface, asbestos, brickwork, concrete block. |
| 10 | VOC (gm/ltr) | 07.1gm/ltr |
| 11 | Certification | As per IS 15489:2004 |
| 12 | Fire Hazard Class | Non - flammable |
| 13 | Safety Data | Refer MSDS |
Shelf life: 3 years from date of manufacture in original tightly closed containers. Keep the container away from direct sunlight and excessive heat.
Safety Measures:
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of skin contact, immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
No added Lead, Mercury or Chromium compounds.
Precautions:
Store the product at ambient conditions in well ventilated locations. Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
In high humidity areas, use of a Bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould, etc. before application of the paint system.
Do not apply when ambient temperature is less than 100C or if the temperature might drop to this level within 4 hrs of application.
Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Use diluted materials within 48 hours
Stir well and strain before use.
Keep the container tightly closed to prevent drying.
For deeper shade apply 1 additional coat.
SPECIAL NOTE *
Before painting the following things should be checked thoroughly:
1. pH value of the wall surface (Ideal condition between 7-10).
2. Moisture content of the wall (Ideal condition –below 10-12%).
If these are violated, owner will be responsible.
*As per test conducted at Apollo R&D.
DISCLAIMER: The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carry out tests & take trials to ensure on suitability of products meeting their requirements prior to full scale usage of our products. Since the correct identification of problems, quality of other materials used and on- site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained. The company does not assume any liability or consequential damage for unsatisfactory results arising from the use of our products.